Neopixel SN4.0 Lightsaber Guide
- Before reading this manual, please first make sure that your lightsaber version is SNV4.0, and that you distinguish between single button and double buttons.
- lightsabers generally have three states, off, standby, and active.
-
Second, please make sure you understand what the standby and active modes of your lightsaber are.
Standby: The blade is not lit, but the button indicator is lit.
Activated: The blade is lit (the LED is active) and making sound (if enabled).
Single Button Control
| When the blade is in the power-off state | Button Operation |
|---|---|
| Switch between 82 and 92 blade types | Press the button three times in quick succession. |
| Wake up the blade | Long press the button. |
| While blade is in standby mode | |
|---|---|
| Enter power-on mode | Short press the button after entering standby mode. |
| Enter power-off mode |
|
| Switch the volume | Press and hold the button until the breathing light blinks once, then release. |
| Switch power-on effects | Press and hold the button until the breathing light blinks twice, then release. |
| Switch regular lighting effects | Press and hold the button until the breathing light blinks three times, then release. |
| Switch sound effects | Press and hold the button until the breathing light blinks four times, then release. |
| While blade is active | |
|---|---|
| Enter standby mode | Press and hold the button until the breathing light blinks four times to enter standby mode. |
| Enter power-off mode | Press and hold the button until the breathing light stops flashing. |
| Shockwave | Quickly tap the button. |
| LOCK-UP | Press and hold the button until the breathing light blinks once, then release. |
| Switch colors | Press and hold the button until the breathing light blinks twice, then release. |
| Toggle FOC on/off | Press and hold the button until the breathing light blinks three times, then release. |
| In Standby Mode | Motion Control Operation |
|---|---|
| Reverse to switch sound effects | Hold the button, tilt the blade upwards, and then rotate. |
| Enable or disable BGM | Hold the button, tilt the blade downwards, and then rotate. |
| In Active Status | |
|---|---|
| Force | Hold the button, tilt the blade upwards, and then rotate. |
| Switch colors | Hold the button, tilt the blade downwards, and then rotate. |
| Drag | Hold the button and tap the blade. |
| Melt | Hold the button and thrust forwards horizontally. |
| Stab | Release the button and thrust forwards. |
Two-button operation
- PWR Button: Main Button, Power Button.
- AUX Button: Auxiliary Button, Function Button.
- Note:
- When the buttons are distributed up and down: Upper button is the main button, lower button is the AUX button;
- When the buttons are distributed left and right: Left button is the main button, right button is the AUX button.
- Charging: Insert the charging cable, and the charging sound effect will play while the breathing light blinks.
| When the blade is in the power-off state | Button Operation |
|---|---|
| Switch between 82/92 blade types | Quickly press the PWR button three times. |
| Enter standby mode | Long press the PWR button to hear the power-on sound effect and enter standby mode. |
| While blade is in standby mode | |
|---|---|
| Enter power-on mode | Short press the PWR button to enter power-on mode. |
| Enter power-off mode | Quickly press the AUX button three times to hear the power-off sound effect and enter power-off mode. |
| Switch sound effects | Short press the AUX button once and then release. |
| Switch power-on startup effects | Long press the main button to hear the corresponding sound indicating a successful switch. |
| Switch power-on default lighting effects | Long press the AUX button to hear the corresponding sound indicating a successful switch. |
| Adjust volume | Simultaneously press and hold the PWR and AUX buttons to enter volume setting mode. Short press the main button to increase the volume; short press the AUX button to decrease the volume. Press both buttons simultaneously again to hear the sound indicating the exit from volume setting mode. |
| While blade is active | |
| Enter power-off mode | Short press the PWR button to enter power-off mode. |
| Shockwave | Short press the AUX button. |
| LOCKUP | Long press the AUX button for one second, then release to enter LOCKUP mode. Short press the AUX button again to exit LOCKUP mode. |
| Toggle FOC on/off | Simultaneously press the PWR and AUX buttons in power-on mode to toggle FOC mode on or off. |
| In Standby Mode | Motion Control Operation |
|---|---|
| Reverse to switch sound effects | Hold the PWR button, tilt the blade upwards, and then rotate. |
| Enable or disable BGM | Hold the PWR button, tilt the blade downwards, and then rotate. |
| In active mode | |
|---|---|
| Force | Hold the PWR button, tilt the blade upwards, and then rotate. |
| Switch colors | Hold the PWR button, tilt the blade downwards, and then rotate. |
| Drag | Hold the PWR button and tap the blade. |
| Melt | Hold the PWR button and thrust forwards horizontally. |
| Stab | Release the PWR button and thrust forwards. |