One Button// Sense operation

1. Standby Mode: 
The button light is on but the blade is off
2. Power ON: 
The button light is on and the blade is on

3. Standby Mode: 

• Turn on: Twist the saber
• Switch Sound fonts: when the blade is up, Hold the button then twist saber.
• Switch BGM: when the blade is down, Hold the button then twist saber.

4. Power ON: 

• Turn off: Twist the saber.
• Switch blade colour: when the blade is down, Hold the button then twist sabre.
• Force: when the blade is up, Hold the button then twist saber.
• FOC: Hit the saber
• Drag: Hold the button then hit the saber
• Melt: Hold the button then thrust the saber

One Button// Button operation

1. Standby Mode

• Wake up: Hold the button until the button light is on, then it will enter the standby mode
• Turn on: Tap the button
• Adjust volume-3mode: Hold the button until the breath light flashes once then release
• Switch boot effect: Hold the button until the breath light flashes twice then release
• Switch blade effects. Hold the button until the breath light flashes Three times then release
• Switch sound fonts: Hold the button until the breath light flashes Four times then release.
• Power saving mode: Hold the button until the breathing light is off. (No operation for 10 minutes)

2. Power ON

• Blaster: Tap the button.
• Lock-up: Hold the button until the breath light flashes once then release.
• Colour change: Hold the button until the breath light flashes twice then release
• FOC off/on: Hold the button until the breath light flashes Three times then release.
• Turn off: Hold the button until the breath light flashes Four times then release.

PWR/AUX//Button operation

1. Standby Mode

• Turn on: Tap the PWR.
• Switch Sound fonts: Tap the AUX. Enter volume mode: Tap the PWR and AUX at the same time, Then tap the PWR to increase the volume, tap the AUX to decrease the volume.
• Exit volume mode: Tap the PWR and AUX at the same time
• Switch boot effect: Hold the PWR for 1 second then release.
• Switch blade effects: Hold the AUX 1seconothen release.
• Power saving mode: No operation for 10 minutes.

2. Power ON

• Turn off： Tap the PWR.
• Blaster： Tap the AUX.
• Lock-up： Hold the AUX then release.
• FOC off/on： Hold the PWR then release

PWR/AUX// Sense operation

1. Standby Mode

• Turn on： Twist the saber.
• Switch Sound fonts： When the blade is up, Hold the AUX button then twist saber.
• Switch BGM： When the blade is down, Hold the AUX button then twist saber.

2. Power ON

• Turn off: Twist the saber.
• Switch blade color: When the blade is down, Hold the AUX button then twist saber.
• Force: When the blade is up, Hold the AUX button then twist saber.
• Drag: Hold the PWR buton then hit the sabe
• Melt: Hold the AUX button then thrust the saber.
• FOC: Hit the saber